Page 8 - cat1100

Basic HTML Version

6
To Place An Order Call:
1-800-SCHMIDT
800-724-6438
www.cggschmidt.com
S-ALLOY AND CARBIDE TIPPED
STILE AND RAIL CUTTER SETS
FOR INTERIOR AND EXTERIOR DOORS
All sets 4" diameter x 1-1/4" bore, 3 wing.
Use bearing AC113 3" x 1-1/4" bore for pattern shaping.
Sets consists of 6 cutters - trims tongue to length.
Hollow mortising chisels and bits available. See page 34.
WC220C
CARBIDE
3/8"R
1/4"
1-3/4"
WC220
S-ALLOY
OVOLO
Pattern
for 1-3/4"
thick Panel
Doors.
OVOLO
Pattern
for 1-3/8"
thick Panel
Doors.
WC222C
CARBIDE
5/16" R
1-3/8"
1/4"
•For bushings to other bore sizes see accessories on page 9.
WC222
S-ALLOY
BEAD &
COVE
Pattern
for 1-3/4"
thick Panel
Doors
WC221C
CARBIDE
1-3/4"
1/4"
1/4"R
WC221
S-ALLOY
BEAD &
COVE
Pattern for
1-3/8" thick
Panel Doors
7/32"
1-3/8"
7/32"
1/4"
CARBIDE
WC223C
WC223
S-ALLOY
WC225
S-ALLOY
GLASS PANEL
CUTTERS for
All Schmidt
Door Sets
Use these cutters with
any of the sets listed
above to produce an
inlaid glass panel door.
This set consists of
(2) 1-1/4" wide cutters
to be used with 1 stile
cutter and 1 rail cutter to make a joint as shown. The rabbet
depth produced is 1/2".
Rabbeting cutters only, does not include profile cutters.
WC225C
CARBIDE
1/4" & 3/8" TONGUE & GROOVE CUTTERS
Make these door sets more versatile with these replacement
groovers. WC220,WC221, and WC224 can accommodate
material up to 2-1/4" with the addition of either of these sets.
WC222, WC223 and WC226 will cut up to 1-3/4" doors. Use
separately or with 1/4" groover supplied with sets.
3/8"
3/8"
      1/4"
  1/4"
WC2238
S-ALLOY
WC2238C
CARBIDE
WC2234
S-ALLOY
WC2234C
CARBIDE
SHAPER CUTTERS
STILE AND RAIL CUTTERS FOR ENTRY DOORS
NEW!
BEVEL
Pattern for
1-3/4" thick
Panel Doors
WC224C
CARBIDE
1-3/4"
1/4"
WC224
S-ALLOY
BEVEL
Pattern for
1-3/8" thick
Panel Doors
WC226C
CARBIDE
1-3/8"
1/4"
WC226
S-ALLOY