Page 9 - cat1100

Basic HTML Version

7
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
S-ALLOY TIPPED.
Schmidt window sash cutter sets use a series of tenons up to 2-1/4" long to produce strong joints in
casement and double hung sash. Sets # WC230IN, WC231IN, WC232IN are designed to accommodate
insulated glass up to 1/2" thick. Sets WC230, WC231, WC232 are for single strength bead glass. Sticking, rabbeting, and all
cope joints shown here can be made with any of our standard sets. Due to the width and depth of cut, a minimum of 5 horse
power is recommended for these tools.
A. TOP AND
BOTTOM RAILS
B. TOP
CHECK RAIL
C. BOTTOM
CHECK RAIL
B
A
C
A
BOTTOM SASH
TOP SASH
• Sets consist of 6
cutters & 1 spacer.
• 1-1/4" bore, 3
wing cutters.
• Use bearing AC115
3-1/2" x 1-1/4" bore
for Pattern Shaping.
• Large diameter cope
cutters (approx. 7")
allow tenons up to
2-1/4" long.
• Can be made
with carbide tips.
(Special order).
• Sets for different
profiles quoted on
request.
• Cope cutters can
be made to fit your
tenoner.
1/2" PARTING STRIP
BOTTOM CHECK RAIL
TOP CHECK RAIL
CHECK RAIL CUTTER
For cutting Check Rails on Double Hung Sash
with 1/2" or 3/8" Parting Strip.
• 4" Diameter x 1-1/4" Bore, 3 wing.
• These cutters, when combined with our stock Sash
Cutters, cut everything you need to produce double
hung sash. Tipped with S-Alloy for smooth cutting.
(Not included with Window Sash Cutter Sets).
Carbide available by special order.
WC235
CAT. NO.
WC236
CAT. NO.
3/8"
3/8"
1/4"
WC231
CAT. NO.
1/4"
3/8"
3/8"
WC232
CAT. NO.
3/8"
3/8"
1/4"
WC230
CAT. NO.
3/8"
1/8"
1/2"
WC231IN
*
CAT. NO.
3/8"
1/8"
1/2"
WC232IN
*
CAT. NO.
3/8"
1/8"
1/2"
WC230IN
*
CAT. NO.
1/2"
3/8"
*
Indicates Special Order
Hollow mortising chisels and bits available. See page 34
WINDOW SASH CUTTERS
WINDOW SASH CUTTER SETS