Page 33 - Charles G.G. Schmidt
P. 33

        2 Knife
4 Knife
Dual Angle
Length
CAT. NO.
CAT. NO.
CAT. NO.
2-1/4"
MH4422
MH442
MH442D
4"
MH4442
MH444
MH444D
5"
MH4452
MH445
MH445D
6"
MH4462
MH446
MH446D
7"
MH4472
MH447
MH447D
8"
MH4482
MH448
MH448D
9"
MH4492
MH449
MH449D
2 Knife
4 Knife
 Length
CAT. NO.
CAT. NO.
50mm
MH4612
MH461
100mm
MH4622
MH462
150mm
MH4622A
MH462A
180mm
MH4632
MH463
230mm
MH4642
MH464
 4 Knife
6 Knife
Length
CAT. NO.
CAT. NO.
2-1/4"
MH642
MH662
4"
MH644
MH664
6"
MH646
MH666
 4 Knife
6 Knife
Length
CAT. NO.
CAT. NO.
2-1/4"
MH672
MH682
4"
MH674
MH684
6"
MH676
MH686
 4 Knife
6 Knife
Length
CAT. NO.
CAT. NO.
50mm
MH405
MH605
100mm
MH410
MH610
150mm
MH415
MH615
180mm
MH418
MH618
230mm
MH423
MH623
 CAT. NO.
 MH820
 CAT. NO.
Grease Gun for Hydro-Lock heads
MH816
Grease Gun Rebuilding Kit
MH816A
Grease for Hydro-Lock heads -per tube
MH817A
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
 31
CUTTER HEADS
 STANDARD MOULDER HEADS
STANDARD MOULDER HEADS
For American, European and Japanese Machines.
5-3/8" (137mm) diameter Straight Bore
Supplied with a 22° cutting angle, 16-60° corrugations and a 1-13/16" bore.
4-13/16" (122mm) diameter Straight Bore for Weinig, Wadkin, SCMI & similar machines.
        Supplied with 16-60° corrugations and use 1/4", 5/16" , 3/8" or 10mm thick steel. 2knifeand4knifeheadscomewith15°cuttingangle. Dualangle headshave12° and20°cuttingangles. Specify1-1/2"or40mm borewhenordering. AddMto end of part number for 40mm bore. Supplied with 1-1/2" if not speci ed. All heads are supplied with pocket style gibs. Knives are additional.
6" (150mm) diameter x 2-1/8" or 1-13/16" straight bore
Supplied with 15° cutting angle and 16-60° corrugations. Specify 1-13/16" or 2-1/8" bore when ordering.
6" (150mm) diameter with open-end self-centering sleeves
Supplied with hex nut, 15° cutting angle and 16-60° corrugations. Specify 1-13/16" or 2-1/8" bore and direction of rotation when ordering.
                GREASE GUNS AND GREASE
Grease  ttings (2) are installed on ends unless speci ed. Recommended safety locking rings are available.
6" (150mm) diameter Hydro-Lock Moulder Heads
Supplied with 15° cutting angle and 16-60° corrugations. Specify 1-1/2", 40mm,1-13/16" or 2-1/8" bore when ordering.
     NEW SIZES!
   31   32   33   34   35