Page 43 - Charles G.G. Schmidt
P. 43

             PROFILE NO. ISR10
Stile Insert CAT. NO. ISR10SC Rail Insert CAT. N0. ISR10RC
PROFILE NO. ISR40
Stile Insert CAT. NO. ISR40SC Rail Insert CAT. NO. ISR40RC
  PROFILE NO. ISR50
Stile Insert CAT. NO. ISR50SC Rail Insert CAT. NO. ISR50RC
   Stile head
 CAT. NO.
 ISRH100S
 Extras
Screws
Gibs
CAT. NO.
ISR800
ISR801
PROFILE NO. ISR60
Stile Insert CAT. NO. ISR60SC Rail Insert CAT. NO. ISR60RC
   PROFILE NO. ISR20
Stile Insert CAT. NO. ISR20SC Rail Insert CAT. NO. ISR20RC
 PROFILE NO. ISR30
Stile Insert CAT. NO. ISR30SC Rail Insert CAT. NO. ISR30RC
 BODIES AND INSERTS
 CAT. NO.
Body to cut tongue
ISRH700R
Body to cut groove
ISRH700S
Tongue insert
ISR70RC
Groove insert
ISR70SC
Tongue insert w/ eased edge
ISR70RCEE
Groove insert w/ eased edge
ISR70SCEE
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
Rail head
 CAT. NO.
 ISRH100R
 41
INSERT CUTTERS STILE AND RAIL
 INSERT STILE AND RAIL
INSERT STILE AND RAIL CUTTERS FOR KITCHEN CABINET DOORS. WING CUTTERS OR ROUTER BITS
Using ONLY Two steel bodies you can cut any of these Six Pro les
Manufactured to precision tolerances, these alloy steel bodies can accommodate any of the six pro les shown without backer plates. Using the stile cutter to cut the pattern cuts and the rail cutter to cut the cope cut, these cutters produce a perfect  t every time. All inserts are ground to same center line for ease of set up.
Carbide tips are available for cutting all types of woods and
man made materials. All inserts are 30mm wide to accommodate material thicknesses from 3/4" to 1". Inserts are not included in cost of bodies. Cutters are made to run in a counter clockwise rotation
with the wood face down.
Also in 4" diameter, 3" minor. Please specify Custom pro les and diameters on request.
Cutter Speci cations:
• 4-1/2" Diameter • 20° Cutting angle
• 1-1/4" Bore • 3 Wings
• Tip width - 30mm (1.1811")
• Black Oxide Finish
• 3-1/2" min. dia.. (Use bearing AC115)
• Bushings for other bore sizes
available
INSERT STYLE SHAKER DOOR SET Produce shaker style doors with or without eased
       edges with this this dedicated set.
Cutter Speci cations:
• 4-1/2" Diameter • 20° Cutting angle 1/4” • 1-1/4" Bore • 3 Wings
• Tip width - 30mm (1.1811")
• Black Oxide Finish
• 3-1/2" min. dia.. (Use bearing AC113) • Bushings for other bore sizes
available.
• Also available with eased edges.
1/2”
              1/2” 1/4”
         






























   41   42   43   44   45