Page 45 - Charles G.G. Schmidt
P. 45

        STYLE
ABC
KVS/PKG
 CAT.NO.
S2
1/4" x 12 x 1.5mm
10
INKS202
S2
7.65 x 12 x 1.5mm
10
INKS207
S2
15 x 12 x 1.5mm
10
INKS215
S2
20 x 12 x 1.5mm
10
INKS220
S2
25 x 12 x 1.5mm
10
INKS225
S2
30 x 12 x 1.5mm
10
INKS230
S2
40 x 12 x 1.5mm
10
INKS240
S2
50 x 12 x 1.5mm
10
INKS250
S2
60 x 12 x 1.5mm
10
INKS260
S2
80 X 13 X 2.2mm
10
INKS280
S4
14 x 14 x1.2mm
10
INKS410
S4
12 x 12 x 1.5mm
10
INKS412
S4
13 x 13 x 2.5mm
10
INKS413
S4
14 x 14 x 2.0mm
10
INKS414
S4
15 x 15 x 2.5mm
10
INKS415
S4
18 x 18 x 1.95mm
10
INKS418
                  S2 B
A
S4 B
A
35° C
30° C
                                                                     CAT. NO.
Description
INKS414S
Replacement screw for INKS414
INKS414TW
Torx wrench for INKS414S
INKS415S
Replacement screw for INKS415
INKS415TW
Torx wrench for INKS415S
Insert Width
20mm
25mm
30mm
35mm
40mm
50mm
60mm
Insert Height
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
20mm
IC2020SS
IC3020SS
IC3520SS
IC4020SS
IC5020SS
IC6020SS
25mm
IC2025SS
IC2525SS
IC325SS
IC3525SS
IC425SS
IC5025SS
IC6025SS
30mm
IC2030SS
IC2530SS
IC330SS
IC3530SS
IC430SS
IC5030SS
IC6030SS
35mm
IC2O35SS
IC2535SS
IC3035SS
IC3535SS
IC435SS
IC5035SS
IC6035SS
40mm
IC2040SS
IC3040SS
IC3540SS
IC4040SS
IC5040SS
IC6040SS
Insert Width
20mm
25mm
30mm
35mm
40mm
50mm
60mm
Diameter
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
4" to 5"
ID3420
ID3425
ID3430
ID3435
ID3440
ID3450
ID3460
Over 5" to 6"
ID3520
ID3525
ID3530
ID3535
ID3540
ID3550
ID3560
Over 6" to 7"
ID3620
ID3625
ID3630
ID3635
ID3640
ID3650
ID3660
Over 7" to 8"
ID3720
ID3725
ID3730
ID3735
ID3740
ID3750
ID3760
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
 43
CARBIDE INSERTS CUSTOM INSERT HEADS
 CARBIDE INSERTS, CUSTOM INSERT TOOLING
SOLID CARBIDE INDEXIBLE INSERTS TURNABLE STRAIGHT KNIVES
Indexable inserts are available in a variety of sizes. See chart for complete selection.
                REPLACEMENT SCREWS AND TORX WRENCHES
        All inserts have a hole size of 4.0mm, except INKS414, which has a hole size of 6.5mm with chamfer.
SOLID CARBIDE PROFILED INSERTS
PROFILED inserts are available in a variety of sizes. See chart for complete selection.
Cutting edge width determined by  rst number. Height by second
           Pricing single sided carbide inserts for our heads can be done using this chart. Determine the the cutting edge width and the height of the insert. Prices are for individual inserts. Minimum quantity of 6 pieces per pro le. Maximum depth of cut for the largest single sided insert is .787". Double sided inserts are approx 20% more.
         DEDICATED INSERT HEADS
  Our dedicated insert heads will save you money and time in applications where consistent pro les are needed over very long runs, and in abrasive man-made materials. There is no need for extra cutters, and down time is minimized because of the accuracy and repeatability of our inserts. Available in C4 carbide, these inserts, made to industry standards, are always readily available and will last many times longer than comparable brazed tooling. Depending on width and depth of pro le, multiple cutting edges can be put on an insert, making them even more economical. Below you will see a chart to give you an idea of what our insert cutter will cost. These cutters are three wing. This cost is for the bodies alone. Using the insert chart above will give you an accurate cost of each insert. Cutters with additional wings or hydro
bores for greater running speeds can be quoted on request.
        Standard bores for these cutters are 30mm, 1-14", 1-1/2", 40mm, 1-13/16", 2-1/8"
• Black Oxide  nish
       NEW!
NEW!
NEW!
NEW!
   43   44   45   46   47