Page 49 - Charles G.G. Schmidt
P. 49

         CAT. NO. Upcut
   CAT NO. Downcut
   Cutting Diameter
   Cutting Length
  Shank Diameter
  Overall Length
   Two Flute Upcut/Downcut Laminate Grade Spirals
 RCUL2304
  RCDL2304
  3/8"
  1"
 3/8"
 3"
 RCUL2354
  RCDL2354
  1/2"
  1-1/4"
 1/2"
 3"
 RCUL2364
   RCDL2364
   1/2"
   1-5/8"
  1/2"
  3-1/2"
   Three Flute Upcut/Downcut Laminate Grade Spirals
 RCUL3304
  RCDL3304
  3/8"
  1"
 3/8"
 3"
 RCUL3350
  RCDL3350
  1/2"
  1"
 1/2"
 3"
 RCUL3364
   RCDL3364
   1/2"
   1-5/8"
  1/2"
  3-1/2"
  CAT. NO.
   Cutting Diameter
   Cutting Length
  Shank Diameter
  Overall Length
   Two Flute Compression Laminate Grade Spirals
 RCCL2310
  3/8"
  1-1/4"
 3/8"
 3"
 RCCL2352
  1/2"
  1-1/8"
 1/2"
 3"
 RCCL2354
  1/2"
  1-1/4"
 1/2"
 3"
 RCCL2362
  1/2"
  1-3/8"
 1/2"
 3"
 RCCL2364
   1/2"
   1-5/8"
  1/2"
  3-1/2"
   Three Flute Compression Laminate Grade Spirals
 RCCL3310
  3/8"
  1-1/4"
 3/8"
 3"
 RCCL3354
  1/2"
  1-1/4"
 1/2"
 3"
 RCCL3362
  1/2"
  1-3/8"
 1/2"
 3-1/2"
 RCCL3364
  1/2"
  1-5/8"
 1/2"
 3-1/2"
 RCCL3414
   5/8"
   2"
  5/8"
  4"
  CAT. NO.
  Cutting Diameter
  Cutting Length
  Shank Diameter
  Overall Length
   Two Flute Mortise Compression Laminate Grade Spirals
 RCML2310
 3/8"
 1-1/4"
 3/8"
 3"
 RCML2354
 1/2"
 1-1/4"
 1/2"
 3"
 RCML2362
 1/2"
 1-3/8"
 1/2"
 3-1/2"
 RCML2364
 1/2"
 1-5/8"
 1/2"
 3-1/2"
 RCML2454
  3/4"
  2"
  3/4"
  4"
   Three Flute Mortise Compression Laminate Grade Spirals
 RCML3310
 3/8"
 1-1/4"
 3/8"
 3"
 RCML3354
 1/2"
 1-1/4"
 1/2"
 3"
 RCML3362
 1/2"
 1-3/8"
 1/2"
 3-1/2"
 RCML3364
 1/2"
 1-5/8"
 1/2"
 3-1/2"
 RCML3414
  5/8"
  2"
  5/8"
  4"
 Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
 47
SOLID CARBIDE ROUTER BITS
 LAMINATE GRADE SPIRALS
 TWO FLUTE
Good part pressure with moderate feed rates
Designed to cut todays MDF and products with Melamine laminate, these tools
stand up to these
abrasive products and give an excellent  nsh while achieving higher feedrates.
UPCUT AND DOWNCUT LAMINATE GRADE SPIRALS
   THREE FLUTE
These bits are used where an superior  nish is required. Made with a short upcut on the bottom and a downward spiral on top for good part
pressure.
MORTISE COMPRESSION LAMINATE GRADE SPIRALS
 COMPRESSION LAMINATE GRADE SPIRALS
   47   48   49   50   51