Page 5 - Charles G.G. Schmidt
P. 5

                SINGLE TONGUE & GROOVE
LOCK-MITRE CUTTERS
4-3/4" x 1-1/4" bore 3-wing 3 pc. carbide tipped cutter set to produce single
tongue & groove lock-mitre corners. 45°
FOR PART 1: Position shaper cutter to cut all panels as shown in sketch.
FOR PART 2:
Use one half
of part 1 panels,
place on saw table and cut off tongue with 1/4" groover as shown. This piece becomes Part 2.
See below for groovers or see our new adjustable 1/4" insert groover IG660 on page 37.
3/16"
      P A RT 2 3/4"-1 1/8"
1/4"
P A RT 1
                         CAT. NO.
WC201
 DOUBLE TONGUE AND GROOVE
LOCK-MITRE
CUTTERS
5" x 1-1/4" bore 3-wing 3 pc. carbide tipped cutter set to produce double tongue & groove lock-mitre corners.
FOR PART 1: Position cutter on shaper to cut tongue and groove in center of wood panel when wood is lying  at. Cut half of your panels this way.
FOR PART 2:
Position cutter to cut tongue and groove in center of wood
panel when wood is standing
on end.
        P A RT 2 3/4"-7/8"
3/16" 3/16
P A RT 1
     45°
                 "
         CAT. NO.
WC202
 FLOORING CUTTER SET
4-1/2” x 1-1/4” bore 3-wing carbide tipped 5 pc. cutter set to produce tongue & groove  ooring. 2 pc. tongue cutter allows you to hold dimension for the life of the tool. Fits shapers and XL moulders.
1/32"
1/4"
       3/4"
   CAT. NO.
WC240XL
 TONGUE & GROOVE CUTTER SET
4" x 1-1/4" bore 3-wing 4 pc. carbide tipped cutter set to produce 1/4" x 1/4" square tongue & groove on material up to 1-1/8" thick.
• One 3-wing groover (4" dia.. x 1/4" thick)
• Two 3-wing straight cutters (3-1/2" dia. x 1/2" thick)
• One spacer collar (Not shown)
To cut the tongue joint, use the two 3-wing cutters separated by the spacer collar.
To cut the groove joint, replace the spacer collar with the 3-wing groover.
      1/4 "
1/4 "
                    CAT. NO.
WC200
4" DIAMETER 3 WING
6" DIAMETER 6 WING
8" DIAMETER 6 WING
KERF
CAT. NO.
CAT. NO.
CAT. NO.
1/8" (4 wing) WC140
1/4"
WC141
WC161
WC181
3/8"
WC142
WC162
WC182
1/2"
WC143
WC163
WC183
 CAT. NO.
 WC898
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
 3 3
SHAPER CUTTERS
 SHAPER CUTTERS
CARBIDE TIPPED For hardwood, plywood, chipboard, other glue-bonded or highly abrasive materials, Tungsten Carbide tipped cutting tools are recommended.
  GROOVERS
An excellent grooving cutter for all types of material
Standard bore 1-1/4". Bushings available for smaller bore sizes, see page 8. For larger bores, our boring charge applies.
Scan this QR code to see a pictorial video of our manufacturing facility
       See
 NEW!
















   3   4   5   6   7