Page 51 - Charles G.G. Schmidt
P. 51

         CAT. NO. Upcut
   CAT. NO. Downcut
   Cutting Diameter
   Cutting Length
   Shank Diameter
   Overall Length
   Two Flute Upcut/Downcut Rougher Spirals
 RCUR2310
  RCDR2310
  3/8"
  1-1/4"
  3/8"
  3"
 RCUR2354
  RCDR2354
  1/2"
  1-1/4"
  1/2"
  3"
 RCUR2356
  RCDR2356
  1/2"
  1-1/4"
  1/2"
  3-1/2"
 RCUR2364
  RCDR2364
  1/2"
  1-5/8"
  1/2"
  3-1/2"
 RCUR2372
  RCDR2372
  1/2"
  2-1/8"
  1/2"
  4"
 RCUR2414
  RCDR2414
  5/8"
  2"
  5/8"
  4"
 RCUR2454
   RCDR2454
   3/4"
   2"
   3/4"
   4"
   Three Flute Upcut/Downcut Rougher Spirals
 RCUR3302
  RCDR3302
  3/8"
  1"
  3/8"
  2-1/2"
 RCUR3304
  RCDR3304
  3/8"
  1"
  3/8"
  3"
 RCUR3310
  RCDR3310
  3/8"
  1-1/4"
  3/8"
  3"
 RCUR3312
  RCDR3312
  3/8"
  1-1/4"
  1/2"
  3-1/2"
 RCUR3354
  RCDR3354
  1/2"
  1-1/4"
  1/2"
  3"
 RCUR3364
  RCDR3364
  1/2"
  1-5/8"
  1/2"
  3-1/2"
 RCUR3372
  RCDR3372
  1/2"
  2-1/8"
  1/2"
  4"
 RCUR3414
  RCDR3414
  5/8"
  2"
  5/8"
  4"
 RCUR3454
   RCDR3454
   3/4"
   2"
   3/4"
   4"
    CAT. NO.
   Cutting Diameter
   Cutting Length
   Shank Diameter
   Overall Length
   Two Flute Compression Rougher Spirals
 RCCR2352
  1/2"
  1-1/8"
  1/2"
  3"
 RCCR2354
  1/2"
  1-1/4"
  1/2"
  3"
 RCCR2368
  1/2"
  1-7/8"
  1/2"
  4"
 RCCR2414
  5/8"
  2"
  5/8"
  4"
 RCCR2454
   3/4"
   2"
   3/4"
   4"
   Three Flute Compression Rougher Spirals
 RCCR3310
  3/8"
  1-1/4"
  3/8"
  3"
 RCCR3354
  1/2"
  1-1/4"
  1/2"
  3"
 RCCR3364
  1/2"
  1-5/8"
  1/2"
  3-1/2"
 RCCR3414
  5/8"
  2"
  5/8"
  4"
 RCCR3454
   3/4"
   2"
   3/4"
   4"
  CAT. NO. Upcut
   CAT. NO. Downcut
   Cutting Diameter
   Cutting Length
   Shank Diameter
   Overall Length
   Four Flute Upcut/Downcut Rougher/Finisher Spirals
 RCUF4354
  RCDF4354
  1/2"
  1-1/4"
  1/2"
  3"
 RCUF4364
  RCDF4364
  1/2"
  1-5/8"
  1/2"
  3-1/2"
 RCUF4414
  RCDF4414
  5/8"
  2"
  5/8"
  4"
 RCUF4454
   RCDF4454
   3/4"
   2"
   3/4"
   4"
 Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
 49
SOLID CARBIDE ROUTER BITS
 ROUGHER SPIRALS
UPCUT AND DOWNCUT ROUGHER SPIRALS
    COMPRESSION ROUGHER SPIRALS
TWO FLUTE
Manufactured to cut solid woods and wood com- posites these tools is used
for fast routing
or hogging with higher feed rates. Down cut style provides better part hold down. Up-cut provides better chip removal
THREE FLUTE
Same characteristics as the two  ute tools though faster feed rates can be achieved with these bits.
Plywood, MDF and solid woods are easily cut with these tools where  nish
is not important but long tool life and high feed rates are required
 ROUGHER/FINISHER SPIRALS
  Contact Charles G.G. Schmidt & Co., Inc. for proper ChipLoad for your tool and application
FOUR FLUTE
Designed to cut solid woods, wood composites and some plastics, these bits provide
a downward or upward chip removal, a superior  nish on top or bottom and very fast feed rates
 
   49   50   51   52   53