Page 59 - Charles G.G. Schmidt
P. 59

          MODELS
WEIGHT
 CAT. NO.
18"
22 lbs
AC840
18" *
24 lbs
AC840WE
22"
28 lbs
AC842
22" *
30 lbs
AC842WE
 Drawer Handle Mounting Jig.
  CAT. NO.
 AC860
 CAT. NO.
 AC861
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
 57
LARRY'S CLAMPS DOOR & DRAWER JIGS
 LARRY’S CLAMP, DRAWER & DOOR JIGS
IF YOU MAKE DRAWERS AND DOORS YOU NEED THESE TOOLS
LARRY’S CLAMP
When used in conjunction with bar clamps, Larry’s Clamp is the fastest and easiest way to  atten boards when making glued up panels. Using two hands to hold and operate this air operated unit,  ngers are safely out of the waywhenactivatingtheclamp.Fivehundredpoundsofpressureensures atandevenpanels. Availablein18",22" and 18" and 22" w/ extensions. * Longer lengths can be glued if last glue joint is captured between pressure bar and anvil.
 • Extremely fast and easy to use.
• Pressure bar is “crowned” to ensure
all boards of equal thickness are held tight. • Has safety trigger and
requires two hands to operate. • Holds boards from shifting
while tightening clamps.
• Cylinder has two moving parts,
a piston and return spring.
• Air pressure required -100 psi.
• Will deliver years of useful service.
Before
After
   Scan this QR Code and see Larry's Clamp
in action
 * Accommodates material up to 4" thick. Standard models accommodate material up to 2" thick
  THE DOOR JIG
Position cabinet door handles and pulls with accuracy and speed with this rugged  xture.
• Set one pin at top of door and two pins on
edge
• Pins go through jig for both left and right
THE DRAWER JIG Self-Centering
 hole location
• Hold in place and drill - “It’s just that easy”
• Can be used
on just about any size cabinet door • Two hardened steel drill guides for standard sizes included
• Easily center your drawer handles with this easy to use device.
• Comes with both standard (3", 3-1/2" and 4" cc) and metric ( 64mm, and 96mm cc) drilling guides as well as extension paddles for drawer fronts under 10-1/2"
• Can be used with most standard drawer handle sizes.
• Maximum drawer size 14-1/2" high by 29-1/2" long. Min. 3-1/2" to 6-1/2"
• Hold in place and drill.
   










































   56   57   58   59   60