Door Edge Bevel Cutter — 30°, Mini-Pro (3/4″ Bore)

Cuts a 30° bevel along a door edge or panel edge — the shallowest-but-one of the four angles Freeborn publishes, for a chamfer that reads as a deliberate flat rather than an eased corner. Freeborn builds each angle as a pair in opposite hands, so this cutter and MC-57-026 both cut 30° but present the bevel from opposite sides; pick the one that suits your feed direction and which face of the door carries the detail. Carries 1″ wide tips. The four published angles are 15° (035/036), 22.5° (030/031), 30° (025/026) and 45° (027/028) — for any other angle, or a wider bevel than these, Freeborn quotes custom from their cutter department. Mini-Pro: 3 wing, 3/4″ bore. The Pro-Line equivalent is PC-17-025 on a 1-1/4″ bore; a wider 45° XL version with 1-3/4″ tips exists in Pro-Line only.